TECHNICAL DATA
Pressure vessel codes, PED, ASME, pvcALS™
Mechanical design pressure (g) / temperature
FG PED 1.6 MPa / 180°C *)
FG pvcALS™ 1.6 MPa / 180°C
FG ASME 150 psig / 350°F
FD PED 2.5 MPa / 180°C
FD ASME 300 psig / 350°F
*) Frame FG also approved for 1.2 MPa / 200oC to allow use in steam systems
without safety valves.
CONNECTIONS
FG PED Size 65 mm DIN 2501 PN16
FG pvcALS™ Size 65 mm DIN/GB/GOST PN16, JIS 16 K
FG ASME Size 3" ASME CI. 150
FD PED Size 65 mm DIN 2501 PN25
FD ASME Size 2½" ASME CI. 300

Maximum heat transfer surface

13 m2 (140 sq. ft)
Flow principle of a plate heat exchanger
Dimensions
Measurements mm (inch)
Type H W h
TS6-FG 704 (2723/32") 400 (16") 188 (713/32")
TS6-FD 704 (2723/32") 410 (161/8") 188 (713/32")
The number of tightening bolts may vary depending on pressure rating.
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Physical properties of liquids in question (if not water)
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure